fbpx

WAZER Waterjet ConsumableS AND SERVICING

Learn about WAZER Total Operating Cost, and order supplies.

CONSUMABLES

Both WAZER Pro and WAZER Desktop use the same consumables.

Cutting With Abrasive

The cutting power of waterjets comes from the fine abrasive particles that mix with the water stream.

Using Wazer Cut Beds

The cut bed is the most frequent replacement part. As WAZER cuts your part, it also cuts into the cut bed.

Replacing Nozzles

The nozzle focuses the high pressure water/abrasive mixture. Abrasion wear occurs on the internal surfaces over time.

HIGH PRESSURE PUMP

The high pressure pump is the heart of your WAZER, and requires maintenance at various usage intervals. 

Servicing the High Pressure Pump

The WAZER pump requires periodic servicing, such as oil changes and replacing certain parts. WAZER offers an exchange program to minimize downtime.

WAZER OPERATING COST

WAZER Abrasive

WAZER ProWAZER Desktop
Material:80-Mesh Alluvial Garnet
Abrasive Flow Rate:0.33 lbs/min (0.15 kg/min)
Continuous Cutting:90 min
(prior to refilling abrasive hopper)
60 min
(prior to refilling abrasive hopper)
WAZER Abrasive:Available in North America
3rd Party Abrasive:Cutting performance and operational stability will be affected when using any 3rd party abrasive. For best results WAZER requires an abrasive that matches our calibrated specs. We recommend reaching out to WAZER Support before purchasing any third party abrasive.
Operating Cost:$10.53 per hr of cutting (assumes purchase of a 2,200 lb WAZER Abrasive pallet)

WAZER Cut Beds

WAZER ProWAZER Desktop
Lifetime:20 hrs40 hrs
Operating Cost:$3.32 per hr of cutting$1.66 per hr of cutting
Material:Corrugated polypropylene sheets
Dimensions:13″ x 19” x 4″ in (330 x 483 x 102 mm)
Weight (dry):6 lbs (2.7 kg)
Features:Reversible. Lifetime estimate assumes both sides are utilized.
Top and bottom surfaces heat-welded for flatness.
3” x 3” Grid Pattern acts as reference indicator matching the WAM software.

Order Cut Beds

WAZER Nozzles

WAZER ProWAZER Desktop
Lifetime:300 hrs
Operating Cost:$1.00 per hr of cutting
Materials:Orifice: Ruby or Sapphire
Mixing Tube: Tungsten Carbide
Mixing Chamber: Stainless Steel

Order Nozzles

High Pressure Pump Servicing

PumpWAZER ProWAZER Desktop
Description:Inside the pump head are a variety of sealing components that wear and must be replaced. This is done as a swap: WAZER sends a refurbished pump head and you install it and send the old one back to us.Inside the pump box are a variety of sealing and drivetrain components that wear and must be replaced. This is done as a swap: WAZER sends a refurbished Pump Box and you install it and send the old one back to us.
Lifetime:600 hrs600 hrs
Price:$999$1,499
Operating Cost:$1.67 per hr of cutting$2.50 per hr of cutting
DrivetrainWAZER ProWAZER Desktop
Description:Some of the drivetrain components that connect the motor to the pump wear and must be replaced.N/A. This servicing is included in the Pump Box swap described above.
Lifetime:1,200 hrsN/A
Price:$599N/A
Operating Cost:$0.50 per hr of cuttingN/A
OilWAZER ProWAZER Desktop
Description:Similar to engine oil, pump oil lubricates the pump’s crankshaft.
Lifetime:300 hrs300 hrs
Price$19/qt$19/qt
Operating Cost$0.06 per hr of cutting$0.06 per hr of cutting

Order High Pressure Pump Parts

WAZER Pro

WAZER Pro
Pump Head Swap

$999

WAZER Pro
Drivetrain

$599

WAZER Pro
Pump Oil

$19/qt

WAZER Desktop

WAZER Desktop
Pump Box Swap

$1,499

WAZER Desktop
Pump Oil

$19/qt

See how WAZER owners cut any material

Get news and updates from WAZER in your inbox twice a month

Questions About WAZER Consumables?