WAZER Tech Specs
Top Specs | Cutting Area (D x W) | 12 x 18 in 305 x 460 mm |
---|---|---|
Kerf (width of cut) | 0.044 in 1.2 mm | |
Abrasive Rate | 0.33 lb/min 0.15 kg/min | |
Power Requirement | 110V / 60Hz (North America) 220V / 50Hz (International) | |
Cutting Speed | Depends on Material and Thickness. View all cutting speeds. | |
Maximum Cutting Thickness | Varies by Material. View the maximum cutting thickness for each material. | |
Warranty Period | 1 year. View Limited Warranty details. |
Cutting Specs | Cutting Area (D x W) | 12 x 18 in 305 x 460 mm |
---|---|---|
Cut Bed Size (D x W) | 13 x 19 in 330 x 485 mm | |
Kerf (width of cut) | 0.044 in 1.2 mm | |
Cutting Materials | Cuts metal, glass, plastic, composites, tile, rubber, foam | |
Cutting Speed | Depends on Material and Thickness. View all cutting speeds. | |
Maximum Cutting Thickness | Varies by Material. View the maximum cutting thickness for each material. | |
Continuous Cutting Time | 60 min (prior to refilling the abrasive hopper) | |
Gantry Max Speed | 59 IPM 1,500 mm/min | |
Gantry Positional Accuracy | 0.003 in 0.08 mm |
Abrasive Specs | Abrasive Rate | 0.33 lb/min 0.15 kg/min |
---|---|---|
Abrasive Hopper Capacity | 30 lb 13.5 kg | |
Abrasive Material | 80 Mesh Alluvial Garnet |
Power Specs | 110V / 60Hz WAZER (North America) | Compatible with all countries whose electrical standard is 110V / 60Hz |
---|---|---|
Waterjet Main Unit | 100-240 VAC, 50/60Hz, 2A, 200W | |
Pump Box | 110-120 VAC, 60Hz, 14A, 1,500W | |
220V / 50Hz WAZER (International) | Compatible with all countries whose electrical standard is 220V / 50Hz | |
Waterjet Main Unit | 100-240 VAC, 50/60Hz, 2A, 200W | |
Pump Box | 220-240 VAC, 50Hz, 7.5A, 1,500W |
High Pressure Water Specs | Maximum Allowable Working Pressure | 4,600 psi 317 bar |
---|---|---|
Maximum Working Flow Rate (at 4,000 psi) | 0.5 GPM 1.9 L/min | |
Orifice Diameter | 0.019 in 0.48 mm | |
Orifice Material | Ruby or Sapphire | |
Mixing Tube Diameter (internal) | 0.045 in 1.1 mm |
Input Water Specs | Water Source | Filtered Tap Water |
---|---|---|
Input Water Filter | 300 mesh | |
Input Water Pressure (minimum) | 35 psi 2.4 bar | |
Input Water Flow Rate (minimum) | 1 GPM 3.8 L/min | |
Input Water Hardness (maximum TDS) | 180 ppm 180 mg/L | |
Input Water Temperature (maximum) | 130 °F 54 °C |
Water Drainage Specs | Water Drain Distance from Waterjet (maximum) | 30 ft 9 m |
---|---|---|
Water Drain Height above Waterjet (maximum) | 4 ft 1.2 m | |
Water Drainage Flow Rate (maximum) | 1.5 GPM 5.7 L/min | |
Water Recirculation | Not Recommended |
Software Specs | System Requirements | Internet connection required (for software only) |
---|---|---|
Browser Compatibility | Chrome, Safari, Edge, Explorer, Firefox | |
Compatible Input Design File Types | .dxf, .svg | |
Output Cut File Type | .gcode | |
Connectivity to WAZER Waterjet | SD Card | |
Cost | Free |
Misc Specs | Waterjet Main Unit Size (Desktop) | 34 x 26 x 22 in 856 x 648 x 551 mm |
---|---|---|
Waterjet Main Unit Size (Standup) | 34 x 26 x 48 in 856 x 648 x 1220 mm | |
Pump Box Size | 21 x 15 x 10 in 533 x 379 x 251 mm | |
Waterjet Main Unit Weight (empty tank) | 110 lb 50 kg | |
Waterjet Main Unit Weight (filled tank) | 400 lb 180 kg | |
Pump Box Weight | 92 lb 42 kg | |
Connectivity | Offline. No internet required to run the Waterjet. | |
Noise Emission | 74 +/- 3dB | |
Noise Pressure Level | 87 +/- 3dB | |
Room Temperature (operating) | 32 – 160 °F 0 – 70 °C | |
Room Temperature (storage) | 32 – 104 °F 0 – 40 °C | |
Warranty Period | 1 year. View Limited Warranty details. |
Maintenance Procedures | Short-Term Maintenance | Interval: 20–100 hrs of cutting. View Short-Term Maintenance Procedures |
---|---|---|
Medium-Term Maintenance | Interval: 300 hrs of cutting. View Medium-Term Maintenance Procedures | |
Long-Term Maintenance | Interval: 1,000 hrs of cutting. View Long-Term Maintenance Procedures |