WAZER Tech Specs
| Top Specs |  |  |
|---|---|---|
| Model | WAZER Pro | WAZER Desktop |
| Cutting Area (D x W) | 12 x 18 in 305 x 460 mm | 12 x 18 in 305 x 460 mm |
| Kerf (width of cut) | 0.044 in 1.1 mm | 0.044 in 1.1 mm |
| Abrasive Rate | 0.33 lb/min 0.15 kg/min | 0.33 lb/min 0.15 kg/min |
| Power Requirement | 220V / 60Hz (North America) 220V / 50Hz (International) | 110V / 60Hz (North America) 220V / 50Hz (International) |
| Cutting Speed | Varies by material and thickness. View all cutting speeds. | Varies by material and thickness. View all cutting speeds. |
| Maximum Cutting Thickness | Varies by material. View the maximum cutting thickness for each material. | Varies by material. View the maximum cutting thickness for each material. |
| Warranty Period | 1 year. View Limited Warranty details. | 1 year. View Limited Warranty details. |
| Cutting Specs | ||
|---|---|---|
| Model | WAZER Pro | WAZER Desktop |
| Cutting Area (D x W) | 12 x 18 in 305 x 460 mm | 12 x 18 in 305 x 460 mm |
| Cut Bed Size (D x W) | 13 x 19 in 330 x 485 mm | 13 x 19 in 330 x 485 mm |
| Kerf (width of cut) | 0.044 in 1.1 mm | 0.044 in 1.1 mm |
| Cutting Materials | Cuts metal, glass, plastic, composites, tile, rubber, foam | Cuts metal, glass, plastic, composites, tile, rubber, foam |
| Cutting Speed | Depends on Material and Thickness. View all cutting speeds. | Depends on Material and Thickness. View all cutting speeds. |
| Maximum Cutting Thickness | Varies by Material. View the maximum cutting thickness for each material. | Varies by Material. View the maximum cutting thickness for each material. |
| Continuous Cutting Time | 90 min (prior to refilling the abrasive hopper) | 60 min (prior to refilling the abrasive hopper) |
| Gantry Max Speed | 59 IPM 1,500 mm/min | 59 IPM 1,500 mm/min |
| Gantry Positional Accuracy | 0.003 in 0.08 mm | 0.003 in 0.08 mm |
| Abrasive Specs | ||
|---|---|---|
| Model | WAZER Pro | WAZER Desktop |
| Abrasive Rate | 0.33 lb/min 0.15 kg/min | 0.33 lb/min 0.15 kg/min |
| Abrasive Hopper Capacity | 42 lb 19.1 kg | 30 lb 13.5 kg |
| Abrasive Material | 80 Mesh Alluvial Garnet | 80 Mesh Alluvial Garnet |
| Used Abrasive Collection | >0.33 lb/min >0.15 kg/min Collects all of the used abrasive during cutting. Accidental abrasive pileup on the bottom of the tank does not clog the abrasive collection ports. Abrasive collection system is always recoverable without the need to scoop by hand. Learn more about WAZER’s abrasive collection system. | <0.33 lb/min <0.15 kg/min Collects some used abrasive during cutting. Tank-cleaning cycles are needed afterwards to collect additional abrasive. Uncollected abrasive on the bottom of the tank can clog the abrasive collection ports, requiring draining the tank and scooping out the abrasive by hand. The machine will continue to cut even if the abrasive collection ports are clogged, and the used abrasive will accumulate on the bottom of the tank. Learn more about WAZER’s abrasive collection system. |
| Power Specs | ||
|---|---|---|
| Model | WAZER Pro | WAZER Desktop |
| 110V-220V / 60Hz WAZER (North America) | Compatible with all countries whose electrical standard is 220V / 60Hz | Compatible with all countries whose electrical standard is 110V / 60Hz |
| Waterjet Main Unit | 220VAC, 60Hz, 16.1A, 3700W | 100-240 VAC, 50/60Hz, 2A, 200W |
| Pump Box | N/A (integrated into main unit) | 110-120 VAC, 60Hz, 14A, 1,500W |
| 220V / 50Hz WAZER (International) | Compatible with all countries whose electrical standard is 220V / 50Hz | Compatible with all countries whose electrical standard is 220V / 50Hz |
| Waterjet Main Unit | 220VAC, 50Hz, 16.1A, 3700W | 100-240 VAC, 50/60Hz, 2A, 200W |
| Pump Box | N/A (integrated into main unit) | 220-240 VAC, 50Hz, 7.5A, 1,500W |
| High Pressure Water Specs | ||
|---|---|---|
| Model | WAZER Pro | WAZER Desktop |
| Hydraulic Power | 2,088 W 2.8 HP | 820 W 1.1 HP |
| Maximum Allowable Working Pressure | 8,600 psi 593 bar | 4,600 psi 317 bar |
| Maximum Working Flow Rate (at 7,400 psi for WAZER Pro, and at 4,000 psi for WAZER Desktop) | 0.66 GPM 2.5 L/min | 0.45 GPM 1.7 L/min |
| Orifice Diameter | 0.021 in 0.51 mm | 0.019 in 0.48 mm |
| Orifice Material | Ruby or Sapphire | Ruby or Sapphire |
| Mixing Tube Diameter (internal) | 0.045 in 1.1 mm | 0.045 in 1.1 mm |
| Mixing Tube Material | Tungsten Carbide | Tungsten Carbide |
| Input Water Specs | ||
|---|---|---|
| Model | WAZER Pro | WAZER Desktop |
| Water Source | Filtered Tap Water | Filtered Tap Water |
| Input Water Filter | 300 mesh | 300 mesh |
| Input Water Pressure (minimum) | 35 psi 2.4 bar | 35 psi 2.4 bar |
| Input Water Flow Rate (minimum) | 1.5 GPM 5.7 L/min | 1 GPM 3.8 L/min |
| Input Water Hardness (maximum TDS) | 180 ppm 180 mg/L | 180 ppm 180 mg/L |
| Input Water Temperature (maximum) | 130 °F 54 °C | 130 °F 54 °C |
| Water Drainage Specs | ||
|---|---|---|
| Model | WAZER Pro | WAZER Desktop |
| Water Drain Distance from Waterjet (maximum) | 30 ft 9 m | 30 ft 9 m |
| Water Drain Height above Waterjet (maximum) | 4 ft 1.2 m | 4 ft 1.2 m |
| Water Drainage Flow Rate (maximum) | 1.5 GPM 5.7 L/min | 1.5 GPM 5.7 L/min |
| Water Recirculation | Not Recommended | Not Recommended |
| Software Specs | ||
|---|---|---|
| Model | WAZER Pro | WAZER Desktop |
| System Requirements | Internet connection required (for software only) | Internet connection required (for software only) |
| Browser Compatibility | Chrome, Safari, Edge, Explorer, Firefox | Chrome, Safari, Edge, Explorer, Firefox |
| Compatible Input Design File Types | .dxf, .svg | .dxf, .svg |
| Output Cut File Type | .gcode | .gcode |
| Connectivity to WAZER Waterjet | SD Card | SD Card |
| Cost | Free | Free |
| Certifications | ||
|---|---|---|
| Model | WAZER Pro | WAZER Desktop |
| North America (60Hz) | N/A | UL, cUL, FCC |
| International (50Hz) | CE | CE |
| Misc Specs | ||
|---|---|---|
| Model | WAZER Pro | WAZER Desktop |
| Waterjet Size | 34 x 26 x 55 in 856 x 648 x 1400 mm | Standup configuration: 34 x 26 x 48 in 856 x 648 x 1220 mm Desktop configuration: 34 x 26 x 22 in 856 x 648 x 551 mm |
| Pump Box Size | N/A (integrated into main unit) | 21 x 15 x 10 in 533 x 379 x 251 mm |
| Waterjet Main Unit Weight (empty tank) | 375 lb 170 kg | 110 lb 50 kg |
| Waterjet Main Unit Weight (filled tank) | 800 lb 360 kg | 400 lb 180 kg |
| Pump Box Weight | N/A (integrated into main unit) | 92 lb 42 kg |
| Connectivity | Offline. No internet required to run the Waterjet. | Offline. No internet required to run the Waterjet. |
| Sound Pressure Level | 77.6 dB | 72.3 dB |
| Sound Power Level | 85.4 dB | 87 dB |
| Room Temperature (operating) | 32 – 160 °F 0 – 70 °C | 32 – 160 °F 0 – 70 °C |
| Room Temperature (storage) | 32 – 104 °F 0 – 40 °C | 32 – 104 °F 0 – 40 °C |
| Warranty Period | 12 months. View Limited Warranty details. | 12 months. View Limited Warranty details. |
| Spacial Requirements | ||
|---|---|---|
| Model | WAZER Pro | WAZER Desktop |
| Minimum weight supporting surface must withstand | Floor only 1,300 lb 600 kg | Floor or table 400 lb 180 kg |
| Spatial Footprint | Floor only 46 x 27 in 1.2 x 0.7 m | Floor or table 46 x 27 in 1.2 x 0.7 m |
| Height Clearance | 80 in 2 m above the floor | 25 in 0.6 m above the top of the machine |
| Maintenance Procedures | ||
|---|---|---|
| Model | WAZER Pro | WAZER Desktop |
| Short-Term Maintenance | Interval: 20–50 hrs of cutting. View Short-Term Maintenance Procedures | Interval: 20–50 hrs of cutting. View Short-Term Maintenance Procedures |
| Medium-Term Maintenance | Interval: 300 hrs of cutting. View Medium-Term Maintenance Procedures | Interval: 300 hrs of cutting. View Medium-Term Maintenance Procedures |
| Long-Term Maintenance | Interval: 600 hrs of cutting. View Long-Term Maintenance Procedures | Interval: 600 hrs of cutting. View Long-Term Maintenance Procedures |